There are different types of spray booths, but there is no one-size-fits-all solution. Spray booth manufacturers offer a wide range of options for every budget and application. Here are some of the most common types of painting booth corners:
Dry Filter
This type of booth uses a high velocity fan to draw contaminated air through a filter, which traps overspray particles before they leave the booth. This type is usually used for painting or coating with low viscosity materials such as enamels, lacquers and acrylics.
Water Wash
This type of booth uses a water wash system to trap overspray particles before they leave the booth. A high-pressure water spray passes over the workpiece, scrubbing away paint or coating residue as it goes. This type is often used for painting or coating with high viscosity materials such as epoxies and urethanes.
Powder Coating
A powder coating oven is used to bake powder-based coatings onto metal frames or other objects such as motorcycles or metal furniture pieces. The oven heats up to 230 degrees Celsius, then sprays a fine layer of powder onto the object while it rotates slowly inside the oven. As soon as this layer dries it’s baked again until the desired quality is applied.
Common Uses of Spray Booths
The spray booth can be used for many things, including:
Automobile Painting
The automotive industry uses spray booths to paint cars. The process begins by cleaning the car inside and out. Then the car enters a fully enclosed booth where it is sprayed with paint from all sides. The overspray that comes off the car is collected by a series of filters and cyclones before being disposed of safely away from other workers and customers.
Woodworking
Spray booths are also used in woodworking for spraying finishes on furniture and cabinetry. The same process as in automobile painting applies here as well: wipe down all surfaces with solvent cleaners so that no contaminants will stick to them and then spray them with water-based or oil-based finishes depending on what type of finish you want on your piece.
Plastering
Plasterers often use spray booths to apply plaster onto walls or ceilings because they prevent the material from becoming airborne while it dries. Spraying plaster onto vertical surfaces can be dangerous due to its weight, so many plasterers prefer to work with horizontal surfaces instead such as ceilings and floors.
Spray Booth for Painting Walls
The spray booth has many uses in painting walls. It is used as a safe place to paint walls because it protects the environment from any harmful gases released by paints or chemicals. The spray booth also protects workers from exposure to these harmful chemicals or vapors released during application of paint or other coatings on surfaces.
Conclusion
The market is saturated with a variety of types of spray booths. But which ones are the right fit for your shop and standard spray painting applications? A good way to determine this is to determine what kinds of products you will be painting, the amount you will be spraying, the size of your facility, and the budget you will have to work within. If these match up with any of these booths, you are looking in the right direction.
